Safeguard
Stormdry Masonry Protection Cream
- Water-repellent cream that soaks into external brick, stone and mortar to keep rain out
- One coat covers about 5m² per litre
- Breathable, so walls can still dry out
- Dries to a clear, natural finish
- BBA certified, with a 25-year service life
- Available in 3L, 5L and 20L
Choose your size below.
Want to know when it's available? Get in touch
- UK-wide delivery, including the Highlands, islands and Northern Ireland, and to the Isle of Man. Contact us for the Channel Islands and export. See delivery charges
- UK stock and UK-wide delivery
- Supply only, or supplied and installed
- Trade and public-sector accounts welcome
Need product information or a data sheet? Call 0115 987 0358.
Overview
Built for the job.
Size options
| Size | Covers (one coat) | Suits | Price ex VAT | Price inc VAT |
|---|---|---|---|---|
| 3L | About 15m² | A single wall, chimney or small elevation | Coming soon | Coming soon |
| 5L | About 25m² | One or two elevations of a typical house | Coming soon | Coming soon |
| 20L | About 100m² | Whole houses, terraces and trade jobs | Coming soon | Coming soon |
Stormdry Masonry Protection Cream is a water-repellent silicone cream for external walls. It soaks deep into brick, stone and mortar and stops rain getting in, while still letting moisture inside the wall escape as vapour. Water that hits a treated wall runs off rather than soaking in.
Wet walls lose more heat, can damage cavity wall insulation and can lead to damp patches inside. Safeguard say that keeping walls dry with Stormdry can help improve the energy efficiency of a home by reducing heat loss, and recommend applying it before cavity wall insulation is installed.
It is a thick cream rather than a runny liquid, so it stays on the wall long enough to soak in, without drips or overspray. Only one coat is needed. It goes on white and turns clear as it soaks in, usually leaving the wall looking as it did before within 24 to 48 hours.
Stormdry has a BBA certificate (15/5198) covering brick, mortar, sandstone and concrete, with a service life of 25 years. In BBA testing it reduced water absorption by 99% on brick and 98% on concrete and mortar, and had no meaningful effect on how well brick lets water vapour through.
Using Stormdry for flood resilience
In Safeguard’s own test on a single-skin Fletton brick wall at a flood depth of 0.6m, repointing with Stormdry Repointing Additive No.2 and then applying Stormdry cream cut the flow of water through the wall from 12.5 litres to less than 0.2 litres per m² per minute. Safeguard also say the cream can help walls dry out after a flood.
Where to use it
- Clay brick, sandstone, sand-based mortars and dense concrete blocks
- External walls above the damp-proof course
- Walls that must be dry and porous when treated
Not suitable for
- Painted or sealed surfaces
- Pure limestone
- Some lower-density concrete blocks
- Walls below the damp-proof course
- Walls with high salt levels
How to apply
- Repair the wall first. Stormdry bridges hairline cracks up to 0.3mm. Repoint wider cracks and failed joints, ideally with mortar containing Stormdry Repointing Additive, and let it cure (7 to 14 days for cement mortar, longer for lime).
- Clean the wall and brush off loose material. Treat moss, algae and lichen with a biocide.
- Check the forecast. Apply in dry, mild weather at 5°C and rising, with no rain due for 24 hours.
- Apply one coat by brush, roller or airless spray. Use a brush around windows and deep joints.
- Leave it to soak in. The wall can take light rain after 2 to 4 hours. Full water beading can take up to two months to show.
Specification
Full spec sheet.
| Product type | Water-repellent silicone masonry cream |
|---|---|
| Coats | One |
| Coverage | About 5m² per litre (varies with surface texture and absorbency) |
| Penetration | Up to 12mm (Fletton brick) |
| Crack bridging | Hairline cracks up to 0.3mm |
| Finish | Colourless, natural finish once cured |
| Breathable | Yes. Vapour diffusion of brick unchanged in BBA testing (Sd 0.46 untreated, 0.47 treated) |
| Water absorption reduction (BBA) | Brick 99%, concrete 98%, mortar 98% |
| Service life | 25 years (BBA Certificate 15/5198) |
| Standards | BBA 15/5198; UKCA and CE marked to BS EN 1504-2 |
| Application | Brush, roller or airless spray |
| Application temperature | 5°C and rising |
| Rain resistant | Light rain after 2 to 4 hours |
| Over-painting | Water-based masonry paint after 3 to 10 days |
| Shelf life | 18 months (12 months for 20L) |
| Storage | Cool, ventilated place, lid closed, protect from frost |
| Manufacturer | Safeguard Europe Ltd, UK |
Questions
Common questions.
How much Stormdry do I need?
Work out the area of wall in m² and divide by 5 to get the litres needed. A 3L tub covers about 15m², 5L about 25m² and 20L about 100m².
Will Stormdry change the look of my brickwork?
It goes on white but turns clear as it soaks in. The wall usually looks as it did before within 24 to 48 hours, sometimes slightly darker at first.
Does Stormdry stop walls breathing?
No. BBA testing showed it does not change how well brick lets water vapour through, so moisture inside the wall can still escape.
How long does Stormdry last?
The BBA certificate gives a service life of 25 years when it is applied and maintained as instructed.
Can I use it on a painted wall?
No. It needs bare, porous masonry to soak into. For painted surfaces, look at Stormdry MAX.
Will it fix rising damp?
No. It is for rain penetration on external walls above the damp-proof course. It should not be used below the DPC.
Can I paint over it?
Yes. Water-based masonry paint can be applied after 3 to 10 days.
Technical resources
Datasheets and drawings
Data sheets and test reports for this product.
Who we have worked with










